top of page




The GMT100 is a GPS tracker resistant to water designed for applications that require low current consumption, as Vehicles. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Your GPRS / GPS subsystem supports 850/900/1800/1900 MHz, allowing the location of the GL300 to be monitored in real time or periodically monitored by a back-end server and mobile devices. Its built-in 3-axis accelerometer enables motion detection and increases the battery life through sophisticated power management algorithms. Further reduction in power consumption is achieved by setting up alternative schemes to recharge the internal battery. System integration is simple as complete documentation is available for @ Track protocol resourceful. TheTrack protocol supports a wide variety of reports, including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.



  • 8V wide operating voltage 32V DC

  • u-blox chipset Internal

  • Low power consumption, long standby time with internal battery

  • Quad-band GSM / GPRS 850/900/1800/1900 MHz

  • Track protocol full of built-in features

  • Multiple interfaces I / O (I / O) for monitoring and control

  • Internal 3-axis accelerometer for the conservation of energy and motion detection

  • Energy consumption can be fully configured

  • Three power modes work

  • Water resistant, Compatible with IPX6

  • certificates CE / FCC

GSM specifications



Quad band: 850/900/1800/1900 MHz

Compatible with stage 2/2 + GSM

-class 4 (2W @ 850/900 MHz)

-Class 1 (1W @ 1800/1900 MHz)

GPRSGPRS class 12 multi-slot 
GPRS Class B mobile station

Error Phase RMS5 deg

Force RF Max Out (ext)

GSM850 / GSM900: 33.0 ± 2 dBm

DCS / PCS: 30.0 ± 2 dBm

Input range (input) dynamic-15 ~ -108 DBm

Receiver SensitivityClass ⅡRBER 2% (-107 dBm)

Frequency Stability<2.5 ppm

Maximum frequency error± 0.1 p

GPS Specifications


GPS ChipsetU-blox GPS receiver All-In-One


Autonomy: -148 dBm

Hot start (warm start): -160 dBm

Tracking: -162 dBm

Position accuracy

Autonomy: <2.5m

SBAS: 2.0m

TTFF (open sky)

Cold start (cold start): 30s on average

Warm start (warm start): <30 s

Hot start (warm start): <1.2s



Inputs (inputs) Digital

2 inputs (inputs) digital

1 positive trigger to the detection of ignition

1 input trigger (input) negative for normal use

Inputs (inputs) Analog1 analog input (0.3 - 32V)

Outputs (outputs) Digital1 high side digital output 750 mA max

Outputs (outputs) of the relays

1 relay output with internal lever circuit

Current max 20A @ DC12V

GSM / GPS antennaInternal Only

LED indicatorGSM, GPS and power

Mini USB portMini USB port door to upgrade and debug

General Specifications


Dimensions86mm * 62mm * 26mm


Battery BackupLithium Polymer (LI) 1300 mAh

Voltage Operation8V to 32V DC

Standby time

No report: 330 hours

5 minutes reporting: 200 hours

10 minutes reporting: 230 hours

Operating Temperature

--30 ℃ ~ + 80 ℃ (with betaria)

-40 ℃ ~ + 85 ℃ for storage (without battery)

Power Management

3 wor

Air interface protocol


Transmission ProtocolTCP, UDP, SMS

Scheduled Time ReportInforms the position and status in these intervals

Geo-fenceGeo-fencee and car alarm, supports up to 5 regions of geo-fence internal

Low power alarm Alarm to indicate low battery level

ON ReportTells you when your device is connected

Alarm TrailerAlarm triggered by an accelerometer of three internal shafts

Special alarmSpecial alarm based on inputs (inputs) digital / analog

Remote ControlThe outputs (outputs) Digital podems be controlled using the air interface protocol


Small tracker with internal GPS/GSM antennas

  • Small size

  • Car tracking

  • Parametrized operation (acquire & send)

  • Integrated scenarios

    • Overspeeding

    • Authorized driving (50 iButton keys)

    • Immobilizer

  • Online tracking

  • Low energy consumption in deep sleep mode

FM1110  is  light  real-time  tracking  terminal  with  GPS/GLONASS  and  GSM connectivity, which is  able to collect device coordinates and other useful data and transfer  them  via  GSM  network  to  server .  This  device  is  perfectly  suitable  for applications  where  location  acquirement  of  remote  objects  is  needed:  fleet management,  car  rental  companies,  taxi  companies,  public  transport,  logistics companies,  personal  cars  and  so  on. 

In case of losing connection FM1110 can store up to 8000 records, and once the connection is established the device will send stored data via GPRS. So you won't lose your data (coordinates, sensors data and etc.).

FM1110 can perform tasks on remote objects, such as monitoring engine status, controlling truck's door etc.


  • Track and trace

  • Road assistance

  • International logistics

  • Personal car's and van tracking

  • Fleet management



  • Quad-band 900/1800 MHz; 850/1900 MHz

  • GPRS class 10 (up to 85,6 kbps);

  • SMS (text/data)


  • Small and easy to mount case

  • Internal  GSM  antenna  and  Internal  GPS/GLONASS antenna  allow  mount FM1110  much easier

  • GPS/GLONASS and I/O data acquisition

  • Real Time tracking

  • Smart algorithm of data acquisition (time, distance, angle, ignition and event based)

  • Sending acquired data via GPRS (TCP/IP and UDP/IP protocols)

  • Smart algorithm of GPRS connections (GPRS traffic saving)

  • Operating in roaming networks (preferred GSM providers list)

  • Events on I/O detection and sending via GPRS or SMS.

  • Scheduled 24 coordinates SMS sending

  • 5 geofence zones (rectangular or circle)

    • Auto  Geofencing  crested  for  car  towing  detection  and  car  theft  prevention

  • Deep Sleep mode (less  than  2  mA power  consumption)

  • FOTA (firmware updating via GPRS)

  • 3  operational  modes (Home,  Roaming,  Unknown)  based  on  operator

  • Integrated  scenarios:

    • Over  speeding  to  secure  driver  and  prevent  penalties

    • Immobilizer  function

    • Authorized  driving  (1-Wire®  iButton  ID  keys  up  to  50  iButton  keys)use  to  prevent  stealing  or indicate  drivers

    • Trip  start  and  end  detection

  • FM1110  supports  a  remote  logs  reading

    • FM1110  supports  remote  diagnostic  logs  functionality  using  GPRS.  Possible  issues  resolving  becomes faster .  Manufacturer can  read  logs  remotely  using  SMS/GPRS  to  diagnose  the  FM1110  and  timely  respond to  the  fault


  • 1 Digital Input Reserved for Ignition Status Monitoring

  • 2 Digital Inputs

  • 1 Analog Input (10V or 30V range)

  • 2 Digital Open-collector Outputs (connecting external relays, LED, buzzers etc.)

  • 1-Wire® protocol

  • Motion sensor

  • Power supply (+10...+30) V DC

  • Internal GSM antenna

  • Internal GPS/GLONASS antenna

  • 2 Status LEDs

  • USB Port

  • Configuration and firmware upload (FOTA and via USB cable)


  • NMEA protocol compatible. Messages: GGA, GGL, GSA, GSV, RMC, VTG, TXT

  • 32 channel GPS/GLONASS receiver

  • Not less than -160 dBm



bottom of page